ATTACK GLOBAL (HK) Co.,Ltd.
Tel: 86-021-65457088 sales@attack-forklift.com
Global
News
Contact
Tel: 86-021-65457088
Fax: 86-021-65457513
Add: Room 1502, No.3 Building, No.277 Zheqiao Road, Shanghai China
code ATTACK GLOBAL (HK) Co.,Ltd.

An Introduction to the Semi Electric Pallet Stacker

When carrying out unit pallet stacking operation, the semi electric pallet stacker is often selected. Compared with the electric stacker, the semi electric pallet stacker is less costly to purchase and does not need to occupy too much enterprise funds. And carrying out unit pallet stacking is both safe and efficient, but also fully reflects its outstanding flexibility, tranquility and environmental performance. In view of the convenience of the semi electric pallet stacker, it is necessary for us to have a comprehensive understanding of it.

1)The circuit of the semi electric pallet stacker: it is powered by the battery and the capacity of the battery or the voltage is displayed. With low voltage protection function, it can directly reflect the working condition. The key switch controls the whole circuit, and the built-in charger is equipped with the switch of the conversion relay, which cuts off the working power automatically when charging, so it is safer and more reliable. The selection of wire thread meets the operation requirements of the whole circuit. The selection of all electrical components is safe and reliable.

2) Hydraulic circuit of the semi electric pallet stacker: When lifting or lowering the fork, by adjusting the hydraulic pull rod, the pump station can drive the relative movement of the outer door frame and slide frame through the cylinder, so that the fork rises and falls. The pressure limiting valve includes a hydraulic pump that protects the vehicle and hydraulic system under overload.

3) Parking brake of the semi electric pallet stacker: Through foot brake operation, the brake directly acts on the universal wheel, and immediately plays the role of braking.

4) Steering control of the semi electric pallet stacker: The steering control handle operates on both sides of the steering wheel through the steering mechanism, so it is more convenient and flexible to rotate. And the steering control handle can be turned directly at the desired angle.

5) Drive of the semi-electric pallet stacker: The semi-electric pallet stacker is driven by manpower, and special process nylon or polyurethane is selected for wear resistance, pressure resistance and silence. It is controlled by hand, flexible and portable.

6) The working principle of the semi-electric pallet stacker: when the semi-electric pallet stacker truck lifts, it controls the pump station to work by manipulating the lifting rod, and directly drives the relative movement of the inner and outer portal frames and sliding frames through the cylinder, so that the goods fork rises and falls.

7) Structure of the semi-electric pallet stacker: portal frame steel, battery, motor, hydraulic station, piston rod, chain, wheel, handle and other components.
Related News