As the name suggests, the electric forklift driver's license is a professional certification for forklift drivers. Electric forklift driving is a special job, so you need to master the correct driving skills before you get on the job. The unit will require the driver to have a driver's license. The following electric forklift manufacturers teach you how to get a driving test certificate.
1. Age over 18;
2. Have an educational level suitable for the type of job application;
3. Comply with other requirements specified in safety technical specifications;
4. Be in good health and meet the special requirements of the type of work applied for.
1. "8" driving assessment in the field:
The forklift is fully open and the truck is empty; In addition, the electric forklift manufacturer reminds that candidates must drive strictly according to the prescribed route, buzzing at the start, and turning on the turn signal when starting and turning; Do not hit piles while driving, and the engine shall not stall without any reason; During driving and after parking, no part of the vehicle can go out and press the line; The car must not start in the opposite direction without stopping; When reversing, you need to look back and make sure that it is safe before reversing; the fork should be 200-300mm away from the ground during driving, and the mast should be slightly tilted back, and the height and angle of the fork should not be adjusted while driving; Do not turn the steering wheel on the spot and drive in a semi-linked manner for a long time; The actions must be standardized, the operations must be skilled and accurate, and obvious mistakes are not allowed; follow the instructions and must not violate rules and disciplines.
2. Cross-carriage "Ⅰ" driving assessment:
The vehicle runs strictly according to the prescribed route; Sound the horn when starting, and turn on the turn signal when starting and turning; The operation must be stable, and the pallet must not be collided or pushed. The fork teeth must be completely inserted into the pallet when loading, and the pallet must be placed within the range of the line when unloading and stacked neatly; When the pallet is 200-300mm away from the ground, the mast should be slightly tilted back, and the height and angle of the fork should not be adjusted while driving; Do not turn the steering wheel on the spot and drive semi-linked for a long time; After the operation is completed, the whole vehicle must be parked in the garage, put in neutral gear, pull on the handbrake, and the forks land horizontally, and sing to indicate; Obey the instructions and must not violate rules and disciplines.
The above is the electric forklift (China) manufacturer to provide everyone with the process of obtaining a forklift driver's license and the content of the test. I hope that it will be helpful to friends who want to obtain an electric forklift (China) driver's license. I also wish you all the best in the test!